Tektronix TDP1000
Sonde différentielle haute tension, 1GHz, 1MOhm, +/-42V, x5/x50
Sonde différentielle haute tension. 1GHz. 1MOhm. +/-42V
Temps de montée: <700 ps
Capacité d'entrée : <1 pF
Résistance d'entrée : 1MOhm
Tension d'entrée en mode commun : +/-35 V(DC+ crête AC); 25 Vrms
Gamme de tension d'entrée différentiel : +/-42 V (atténuation x5 ou x50)
Temps de montée: <700 ps
Capacité d'entrée : <1 pF
Résistance d'entrée : 1MOhm
Tension d'entrée en mode commun : +/-35 V(DC+ crête AC); 25 Vrms
Gamme de tension d'entrée différentiel : +/-42 V (atténuation x5 ou x50)
Description
TDP1000
Applications
High-speed switch mode power supply design
CAN/LIN bus design
Digital design and characterization
Manufacturing engineering test
Research and development
High-voltage differential probes
The TDP1000. TDP0500. and P6251 High-voltage Differential Probes are specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI™ probe interface. or TekProbe BNC Interface. These probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:
- Outstanding Electrical Performance
- Versatile Device-Under-Test Connectivity
- Ease of Use
Key performance specifications
1 GHz and 500 MHz probe bandwidth
<1 pf="" differential="" input="" capacitance="" div="">
1 MΩ differential input resistance
±42 v (DC + pk AC) differential input voltage
>18 dB CMRR (at 250 MHz 50X attenuation)
Key features
Outstanding electrical performance
- Selectable bandwidth-limiting filters
- DC reject
Versatile DUT connectivity
- Small compact probe head for probing small geometry circuit elements
- Straight pin. square pin. solder down. variable pitch standard accessories
- Robust design for reliability
Easy to use
- Provides automatic units scaling and readout on the oscilloscope display
- TDP1000. TDP0500
- Connect directly to oscilloscopes with the TekVPI™ probe interface
- Easy access to scope-displayed probe menu for probe setup control and operating status information
- Remote GPIB/USB probe control through the oscilloscope
- AutoZero – zeros out output offset
Specifications
Attenuation (probe only): x5; x50
Bandwidth (probe only): ≥1 GHz
Rise time (probe only): <700 ps="" div="">
Input capacitance: <1 pf="" div="">
Input resistance: 1 MΩ
Sensitivity/noise level: 5X attenuation 2 mVRMS - 10 mVRMS (referred to the probe output) - 50X attenuation 1 mVRMS - 50 mVRMS (referred to the probe output)
Propogation delay: 6.5 ns
Common mode input voltage: ±35 v (DC + pk AC); 25 VRMS
Differential input offset range: ±42 v (5X or 50X attenuation)
Spécifications
| En Stock | Oui |
Articles déjà vus
