FJD TRION P2 Vision+

Act Faster with 3D Thermal Insight

Is this what your thermal inspection still looks like?​

​Rows of similar images. Unclear locations. Hours of manual checking. 

​Traditional thermal imaging shows issues, but not where they are. So your team still spends time on: 

• • Guessing where thermal images were taken
  • Spending hours matching images to locations
  • Revisiting sites to confirm findings

Stop guessing. Start locating.

​FJD Trion P2 Vision+ links every thermal finding to its real-world position, enabling faster follow-up and clearer reporting.

​ ​ Thermal Imaging Module

​ ​ ​Detect hidden anomalies and capture thermal snapshots with high sensitivity.

​ ​ 3D LiDAR

​ ​ ​Capture the full site and anchor every thermal finding to its real-world location.

​ ​ Visible Light Cameras

​ ​ ​ Record visible images and realistic 3D site views for easier revisits and clearer reference.

​ ​ Handheld Battery

​ ​ ​Keep inspection tasks uninterrupted with a dual-battery design and up to 4 hours of runtime.

From hidden risks to clear 3D locations

​By the time damage becomes visible, repair costs have already started to rise. Infrared detection uncovers hidden risks earlier, and 3D spatial context makes every issue easier to locate, document, and act on.

​ ​Water Leakage

​ ​ ​Moisture can hide behind surfaces that appear dry, leading to wall damage and mold growth. FJD Trion P2 Vision+ can spot leaks early and place each issue on a 3D map so teams can find the problem quickly and accurately without lengthy site notes.

​ ​Facade Delamination

​ ​ ​A facade may look stable from the outside, but hidden separation can still be developing beneath the surface. FJD Trion P2 Vision+ uncovers these concealed defects and pinpoints their precise locations across the facade for faster, clearer analysis without repeated site visits.

​ ​

​ ​Electrical Overheating

​ ​ ​Find electrical hotspots before they cause shutdowns. FJD Trion P2 Vision+ detects overheating early, and links each issue to the right equipment quickly, accurately, and without manual labeling.

​ ​

​ ​Pipe Leakage

​ ​ ​What looks normal on the outside may be costing you beneath the surface. Hidden leaks under intact insulation can waste energy and compromise system performance. FJD Trion P2 Vision+ uncovers the problem early, mapping each leak precisely, even in complex piping networks. 

One Walk is all it takes.

​Detect and Document in One Walk

​ ​See it, capture it, and label it right on site. Document anomalies the moment they are found, avoiding the extra time, confusion, and rework of relocating the issue later.

​Linked views for clearer reviews

​ ​Thermal images alone can be hard to interpret. Trion Model links thermal, visible, and 3D views in one workflow, helping teams review findings with clearer spatial context and identify the right location faster.

​One click report, ready for action

​ ​Generate reports faster with floor plans created in one click and anomalies marked in place, turning inspection results into clear, shareable deliverables with less manual sorting, editing, and explanation.

Choose the right model for your needs

Choose P2 Vision+ for dependable everyday inspections. Upgrade to P2 Vision+ Max for finer detail and wider coverage in every scan, so you can inspect more area with fewer passes and less walking.

• P2 Vision+
• • Whether capturing wide-area views or close-up details, P2 Vision+ gives you the right scanning power for every job.
• P2 Vision+ MAX
• • For teams performing detail-critical inspection, P2 Vision+ MAX brings the next level of clarity and coverage. It extends the P2 Vision+ experience with enhanced detail capture and wider reach, helping teams complete close-observation tasks with less walking and greater confidence. 

Specifications

​Thermal Image Resolution  

• • P2 Vision+ : 384 × 288
  • P2 Vision+ MAX : 640 × 512

​Thermal FOV

• • P2 Vision+ : 26° × 20°
  • P2 Vision+ MAX : 48° × 39°

​Thermal Imaging Camera

• • Sensor Type    Vanadium Oxide (VOx) Microbolometer
  • Pixel Size    12 µm
  • Spectral Range  8–14 µm
  • MRAD (Spatial Resolution)   1.2
  • NETD    ≤ 40 mK ( @ 25°C, F1.0)
  • Interface   Type-C 
  • Power   ≤ 0.55 W
  • Temperature Measurement Distance    Maximum 15 m
  • Temperature Accuracy   ± 2 °C or ± 2% of reading

​LiDAR

• • Speed   200,000 pts/s
  • FOV  360° × 59°
  • Range  40 m @ 10% reflectivity | 70 m @ 80% reflectivity
  • Safety Level  Eye Safety Class I
  • Hyperdense  ✓ 
  • Continuous Scanning  ✓ 

​Built-in Camera

• • FOV (Front Camera)  70°
  • FOV (Side Camera)    280° × 149°
  • Resolution (Front Camera)   2 MP
  • Resolution (Side Camera)  2 × 48 MP 
  • Visual SLAM  ✓ 
  • Image Export  ✓ 
  • Image Format  .jpg

​Point Cloud Accuracy

• • Relative Accuracy*  ≤ 1 cm
  • Absolute Accuracy  ≤ 3 cm

​ ​*Lab-tested accuracy; actual results may vary

​General Specifications

• • Dimensions   110 × 106 × 280 mm
  • Weight    700 g (excl. battery and thermal imaging camera) | 980 g (incl. battery and thermal imaging camera)
  • Storage   512G (1TB expandable)
  • Operating Temperature  -20°C ~ 50°C
  • Storage Temperature   ​-40°C ~ 60°C
  • Ingress Protection   IP 54
  • Data Export    ​Wireless Network, USB Type-C, USB Flash Disk
  • Point Cloud Format   .las / .ply / .pts / .e57

​Electrical Specifications

• • Battery Life   4H (1 set of 2 batteries, including thermal camera)
  • Power Supply   DC Handheld Battery
  • Power Consumption   15 W (excluding thermal camera) | 16 W (including thermal camera)
  • Charger    67W Fast Charging
  • Simultaneous Dual-Battery Charging  ✓