TDK-Lambda Genesys 2U 3.3kW

Genesys™ 2U series

 
Programmable 2U Rack Mount power supply

• High Power Density 3/5kW in 2U
• High Current up to 600ADC
• Wide Range of popular worldwide Three Phase AC Inputs
• Power Factor 0.88 (Passive Correction on all Inputs)
• Output Voltage up to 600V. Current up to 600A
• Built in RS-232 & RS-485 Interface standard
• Parallel Current Summing
• Optional Interfaces: USB. LXI compliant LAN. IEEE488.2 SCPI Multi-Drop. Isolated Analog Interface
• Last Setting Memory; Front Panel Lockout
• Advanced Parallel reports total current up to four identical units
• Global Commands for Serial RS-232/RS-485 Interface
• Reliable Encoders for Voltage and Current Adjustment
• Independent Remote ON/OFF and Remote ENABLE/DISABLE
• Reliable Modular and SMT Design
• 19" Rack Mounted for ATE and OEM Applications. zero stack
• Labview™ and LabWindows™ drivers
• Five Year Warranty
• Worldwide Safety Agency Approvals; UL Recognized and CE Mark for LVD and EMC Regulation (208VAC and 400VAC Input)

Applications
Genesys™ power supplies have been designed to meet the demands of a wide variety of applications.

Test & Measurement systems. Component Device Testing.
Semiconductor Processing & Burn-In. Aerospace & Satellite Testing. Medical Imaging. Green Technology.
System Designers will appreciate new. standard. remote programming features such as Global commands.
Also. new high-speed status monitoring is available for the RS-485 bus.

Test Systems using the IEEE-488 bus may achieve significant cost savings by incorporating the Optional IEEE
Multi-Drop Interface for a Master and up to 30 RS-485 Multi-Drop Slaves.

Higher power systems can be configured with up to four 5kW modules. Each module is 2U with zero space
between them (zero stack).
Flexible configuration is provided by the complete Genesys™ Family: 1U 750W Half-Rack.
1U 750W. 1500W and 2400W Full-Rack. All are identical in Front Panel. Rear Panel Analog. and all Digital
Interface Commands.

OEM Designers have a wide variety of Inputs and Outputs from which to select depending on application and
location.

GenesysTM  Power Parallel and Series Configurations

• Parallel operation - Master/Slave:

- Active current sharing allows up to four identical units to be connected in an auto-parallel configuration for four times the output power.

- In Advanced Parallel Master/Slave Mode. total current is programmed and reported by the Master. Up to four supplies act as one.

• Series operation

- Up to two units may be connected in series to increase the output voltage or to provide bipolar output. (Max 600V to Chassis Ground).

Remote Programming via RS-232 & RS-485 Interface

Standard Serial Interface allows daisy-chain control of up to 31 power supplies on the same communication bus with built-in RS-232 & RS-485 Interface with or without Multi-Drop option.

Programming Options (Factory installed)

• New IEEE Multi-Drop Interface

• Allows IEEE Master to control up to 30 (Multi-Drop equipped) slaves over RS-485 daisy-chain
• Only the Master needs be equipped with IEEE Interface
• IEEE 488.2 SCPI Compliant
• Program Voltage          • Program Current
• Measure Voltage          • Measure Current
• Over Voltage setting and shutdown           • Current Foldback shutdown
• Error and Status Messages

• New Multi-Drop Slave Option

• Slaves need to be equipped with the MD Slave (RS-485) option

• Isolated Analog Programming

• Four Channels to Program and Monitor Voltage and Current.
• Isolation allows operation with floating references in harsh electrical environments.
• Choose between programming with Voltage or Current.
• Connection via removable terminal block: Phoenix MC1.5/8-ST-3.81.
• Voltage Programming. user-selectable 0-5V or 0-10V signal.   
     Power supply Voltage and Current Programming Accuracy ±1%
     Power supply Voltage and Current Monitoring Accuracy ±1.5%
• Current Programming with 4-20mA signal.     
     Power supply Voltage and Current Programming Accuracy ±1%
     Power supply Voltage and Current Monitoring Accuracy ±1.5%

• LAN Interface. LXI Compliant to Class C

• Meets all LXI-C Requirements
• Address Viewable on Front Panel
• Fixed and Dynamic Addressing
• Fast Startup

• VISA & SCPI Compatible
• LAN Fault Indicators
• Auto-detects LAN Cross-over Cable
• Compatible with most standard Networks

• USB Interface

• Allows Serial Connection to USB Port on computer
• Serial commands same as (standard) RS-232/RS-485 Interface