Keithley 2010
Multimètre numérique de table 7.5 Digit, faible bruit, 1000 V, 3 A, 120 MOhm
7.5 chiffres de résolution
100 nV rms de bruit de parole
Gammes : 100mV-1000V avec résolution de 10 µV
10 mA-3A avec 1 µA de résolution
10 Ohm-100 MOhm avec 10 Ohm de résolution
CAT II 600 V
Intègre 10 canaux de scanner d'unités centrales
15 fonctions de mesure incluant les mesures de température et le support des RTD
Interface GPIB et RS-232
The Model 2010 combines all the functions needed for characterizing the resistance. linearity. or isolation of contacts. connectors. switches. or relays in a single instrument. With a noise floor of just 100nV RMS. it’s optimized for low voltage and resistance applications like testing the reliability of electrical connectors during development and stress testing.g. Capabilities like a low power ohms mode. dry circuit testing mode.offset-compensated ohms. and an extended 10Ω range make it ideal for developing. validating. or production testing of sensors. transducers. A/D and D/A converters. regulators. references. connectors. switches and relays.
MODEL 2010 FEATURES AND ADVANTAGES
- 15 measurement functions. including DCV. ACV. DCI. ACI. 2WΩ. 4WΩ. dry circuit resistance. temperature (with either thermocouples or RTDs). frequency. period. ratio. continuity measurement. and diode testing.
- Selectable speeds up to 2000 readings/second
- Dry circuit test mode clamps the open circuit voltage at 20mV to prevent punctures in any oxides or films that may have formed on contacts and connectors. Measurement results reflect the “in use” resistance
- Offset compensated ohms function eliminates errors due to cables and connectors
- Low-power ohms measurement mode lets you measure resistance with source current as low as 100μA. minimizing device self-heating
- Built-in scanner mainframe.
TYPICAL MODEL 2010 APPLICATIONS
Benchtop testing. calibration. characterization of low voltage and resistance devices
Production testing of electronic devices such as precision sensors. transducers. A/D and D/A converters. regulators. references. connectors. switches. and relays
Multipoint scan/measure applications with optional plug-in cards
Low channel count temperature monitoring.
SELECTOR GUIDE
Models | 2110 | 2000 | 2010 |
Digits | 5½ | 6½ | 7½ |
Expansion Channel | N/A | 10 | 10 |
DC Volts |
|
|
|
Sensitivity | 1 µV | 1 µV | 1 nV |
Maximum Reading | 1000 V | 1000 V | 1000 V |
Basic Accuracy | 0.012% | 0.002% | 0.0018% |
AC Volts (TRMS) |
|
|
|
Sensitivity | 1 µV | 100 nV | 100 nV |
Maximum Reading | 750 V | 750 V | 750 V |
Basic Accuracy | 0.12% | 0.05% | 0.05% |
Bandwidth | 10 Hz–300 kHz | 3 Hz–300 kHz | 3 Hz–300 kHz |
dB. dBm |
| - | - |
Frequency. Period | - | - | - |
Peak/Avg/RMS | RMS |
|
|
AC. AC+ DC | AC | AC |
|
Ohms (2/4 Wire) |
|
|
|
Sensitivity | 1 MOhm | 100 µOhm | 100 µOhm |
Maximum Reading | 100 MOhm | 120 MOhm | 120 MOhm |
Basic Accuracy | 0.02% | 0.008% | 0.0032% |
DC Amps |
|
|
|
Sensitivity | 0.1 µA | 10 nA | 1 nA |
Range Span | 10 mA–10 A | 10 mA–3 A | 10 mA–3 A |
Basic Accuracy | 0.015% | 0.03% | 0.03% |
AC Amps (TRMS) |
|
|
|
Sensitivity | 10 µA | 1 µA | 1 µA |
Range Span | 1 A–10 A | 1 A–3 A | 1 A–3 A |
Basic Accuracy | 0.3% | 0.1% | 0.1% |
Bandwith | 10 Hz–5 kHz | 3 Hz–5 kHz | 3 Hz–5 kHz |
General Features |
|
|
|
Interface | USB. GPIB (opt.) | GPIB. RS-232 | GPIB. RS-232 |
Reading Hold | - | - | - |
Digital I/O | Trigger In/Out |
|
|
Reading Memory | 1024 rdg | 1024 rdg | 1024 rdg |
Maximum Speed | 50K rdg/s | 2000 rdg/s | 2000 rdg/s |
Temperature Meas. | T/C. RTD. Thermistor | T/C | T/C. RTD |
Garantie Constructeur Standard | 3 Ans |
033-Mesures additionnelles | Résistance | Fréquence | Température | Test de continuité | Test de Diode |
424-TRMS | Oui |
462-Courant | CA (Alternatif) | CC (Continu) |
463-Tension | CA (Alternatif) | CC (Continu) |
023-Résolution en tension | 10 µV |
034-Bande passante | 500 kHz |
037-Tension continue max. | 1000 V |
038-Tension alternative max. | 750 V |
039-Courant continu max. | 3 A |
040-Courant alternatif max. | 3 A |
382-Méthode de mesure de résistance | 2 fils | 4 fils |
119-Niveau de sécurité | CAT II |
En Stock | Non |
120-Surtension de Sécurité | CAT II 600 V |
002-Interface RS232 | Oui |
172-GPIB | Oui |
132-Livré avec | Cordon de test de sécurité modèle 1751, manuel d'utilisation, service de manuel |
035-Dimensions (HxLxP) (mm) | 89x213x370 mm |
013-Poids Net | 5 kg |
- Brochures- fiches techniques