Fluke | 28 II

Back to list

Fluke

Handheld robust TRMS multimeter, 1000V/10A AC/DC, IP67

Code :
FLU28II
Brand :
Fluke
Serie :
27 II, 28 II, 27II, 28II
Manufacturer Ref. :
28 II
Order Ref. :
Fluke-28II/EUR
Industrial multimeter.
True-rms ac voltage and current for measurements.
Voltage: 1000V AC/DC.
Current: 10A AC/DC.
Bandwidth: 15 Hz - 20 kHz.
Resistance, continuity and diode test, temperature, min-max peak.
Min/Max and average recording to capture variations automatically.
low pass filter.
Refer to a friend
Share |
Top
Data logger on PC : No
Functions : Large display
Backlight
Bargraph
Auto-Hold
Fuse protection
Direct input for current probe : No
ATEX : No
TRMS : Yes
Current : AC
DC
Voltage : AC
DC
Number of points (cts) : 6000 counts
Accuracy (%) : 0.05 %
Voltage resolution (V) : 0.1 mV
Minimum DC voltage (V) : 0.1 mV DC
Minimum AC voltage (V) : 0.1 mV AC
Maximum DC voltage (V) : 1000 ACV DC
Maximum AC voltage (V) : 1000V AC
Minimum DC current (A) : 0.1 uA DC
Minimum AC current (A) : 0.1 uA AC
Maximum DC current (A) : 10 A DC
Maximum AC current (A) : 10 A AC
Measures (Type) : Resistance
Capacitance
Frequency
Temperature
Continuity test
Diode test
Min/Max
Duty cycle
Multimeter bandwidth (Hz) : 15 Hz - 20kHz
Autonomy (Hour) : 800 hours
Safety Level : CAT I
CAT II
CAT III
CAT IV
Safety Overvoltage : CAT III 1000V / CAT IV 600V
Communication interface (Type) : na
Additional Characteristics : Robust.
IP67.
Low pass filter.
Package includes : Holster, test leads, alligator clips, manual, CD-ROM, 3 AA batteries
Dimension (HxWxD) (mm) : 635x100x198.1 mm
Net Weight (kg) : 698.5 g
Standard Manufacturer Warranty (Year) : Limited LIFETIME
Top
 Fluke 27 II/28 II
Industrial Multimeters









The NEW standard for rugged


The NEW Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems.
Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop.
The new Fluke 20 Series Multimeters are built to work in the toughest environments.

  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max (28 II)
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II)
Features:
  • New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Hi resolution 20,000 count display mode (28 II)
  • True-rms ac voltage and current for accurate measurements on non linear signals (28 II)
  • Average responding voltage and current for measurements (27 II)
  • New – Backlit keypad buttons allow for easy visibility in lowlit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
  • MSHA approval (pending)
Accuracy specifications
DC voltage
Range 0.1 mV to 1000 V
Accuracy 27-II:0.1 % +1
28-II:0.05 % + 1
AC voltage
Range 0.1 mV to 1000 V
Accuracy 27-II: 0.5 % +3
28-II: 0.7 % +4
DC current
Range 0.1 μA to 10 A
Accuracy 27-II: 0.2 % + 4
28-II: 0.2 % + 4
AC current
Range 0.1 μA to 10 A
Accuracy 27-II: 1.5 % + 2
28-II: 1.0 % + 2
Resistance
Range 0.1 Ω to 50 MΩ
Display counts
27-II 6000
28-II 6000/19,999
Capacitance

1 nF to 9999 μF
Frequency

0.5 Hz to 199.99 kHz
Temperature

27-II: N/A
28-II: -200 °C to +1090 °C
Low pass filter (Measurement on VSD’s)

27-II: N/A
28-II: Yes
Compliance

CAT IV 600 V , CAT III 1000V
IP rating
27-II: IP 67
28-II: IP 67
Power

Three AA batteries
Battery life

800 hours

General specifications
Display
Bar graph/backlight Yes/Yes
Data storage
Peak transient capture 250 μS (28 II)
Min/Max/Avg Yes
Reading hold Yes
Other features
Relative readings (zero) Yes
Battery type Three AA batteries
Warranty and protection
Safety rating CAT IV 600 V/CAT III 1000 V
External protection Rubber holster
Drop test 10 feet drop test
Dustproof/waterproof Yes, IP 67 rated
Warranty Limited lifetime
Size (HxWxL) with holster 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in)
Weight with holster 698.5 g (1.54 lb)