Fluke | 375

Back to list


TRMS mutimeter clamp 600A/600V AC/DC, Hz, mV

Code :
Brand :
Serie :
37x, iflex
Manufacturer Ref. :
Order Ref. :
New TRMS AC/DC clamp meter.
True-rms voltage and current measurements.
Voltage: 600 V AC/DC.
Current: 600 A AC/DC.
Resistance, capacity, frequency, continuity.
500mV DC range.
Jaw opening: 34mm.
iFlex™ flexible current probe: measurement range to 2500 A AC. (In option).
Refer to a friend
Share |
TRMS : Yes
Jaw opening : 34mm
iFlex: Up to 63.5mm (option)
Current : AC (Alternative)
DC (Continuous)
Voltage : AC (Alternative)
DC (Continuous)
Min. DC voltage : nc
Min. AC voltage : nc
Max. DC voltage : 600V DC
Max. AC voltage : 600V AC
Min. DC current : nc
Min. AC current : nc
Max. DC current : 600A DC
Max. AC current : 600A AC
additional measurements : Resistance
Continuity test
Bandwidth : 5-500 Hz
Autonomy : nc
Safety Level : CAT I
Safety Overvoltage : CAT III 1000V / CAT IV 600V
Additional Characteristics : Inrush function.
500mV DC range.
iFlex probe: Measurement range to 2500A AC. (In option).
Package includes : Coated instruction card, safety information sheet, soft carrying case, TL75 test leads, 2 AA Alkaline batteries
Dimension (HxWxD) (mm) : 246x83x43 mm
Net Weight : 388 g
Standard Manufacturer Warranty : 3 YEARS
Fluke 375

Be ready for anything.

With true-rms ac voltage and current measurements, the Fluke 375 Clamp Meter can ready up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.

Safety Conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV


Features and benefits:

  • iFlex flexible current probe expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.
  • CAT IV 600 V, CAT III 1000 V
  • True-rms ac voltage and current for accurate measurements on non-linear signals
  • 500 mV dc measurement range to interface with other accessories
  • Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
  • Ergonomic design fits in your hand and can be used while wearing protective equipment
  • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
  • Three-year warranty
  • Soft carrying case
Diameter of measurable conductor 0.13” or 34 mm max
Operating temperature -14 to 122ºF (-10 to 50ºC)
Storage Temperature -40 to 140ºF (-40 to 60ºC)
Operating Humidity < 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating Altitude 0 to 3000 m
Size 246 x 83 x 43 mm, (9.685 x 3.267 x 1.692 in.)
Weight 388g, (14 oz.)
Temperature Coefficient 0.01% ºC
(<18ºC or > 28ºC)
Warranty Three years for electronics
One year for cable and clamp assembly

Included accessories:

  • Coated instruction card
  • Safety information sheet
  • Soft carrying case
  • TL75 test leads
  • Two AA Alkaline batteries
  • Hard & soft cases (*) :
    • FLUC1600_o2 - Carrying gear box for meter & accessories - OFFER
  • Probe :
    • FLUi2500-18_o - Flex clamp probe, 18inch (45cm), 2.5inch (63.5mm) jaw opening, 2500 A AC, for 37x & 381 (+ 132,00 € Exc VAT)
    • FLUi2500-10_o - Flex clamp probe, 10inch (25cm), 1.4inch (35.6mm) jaw opening, 2500 A AC, for 37x & 381 (+ 132,00 € Exc VAT)

(* mandatory option)

N.B. : You will be able to select your options when you finalise your order.