Chauvin-Arnoux | CA5011

Back to list

Chauvin-Arnoux

TRMS analog/digital multimeter 4,000 counts

Code :
CARCA5011
Brand :
Chauvin-Arnoux
Manufacturer Ref. :
CA5011
Order Ref. :
P01196311E
Automatic AC/DC recognition
• AC/DC voltage: 400mV to 1,000V (5 cal.)
• Utilisation frequency: 20Hz to 10kHz
• Typical accuracy: 0.5% - Impedance: 10MOhm
• AC/DC intensity: 400µA to 10A (6 cal.)
• Resistance: 400Ohm to 40MOhm (6 cal.)
• Continuity test: (R < 400Ohm) et diode
• Frequency: 4kHz to 400kHz (3 cal.)
• Max and Hold value functions
• Can be used as a zero galvanometer
• IEC 1010-1 1,000V Cat III
Refer to a friend
Share |

424,00

Add to cartOrder/Quotation
Demande de devis
  • J’ajoute mes produits à mon panier
  • J'accède à mon panier
  • Je demande mon devis à l'étape n°4
Express Quote for this product
Top
Direct input for current probe : No
Voltage resolution : nc
Min. DC voltage : 400mV DC
Min. AC voltage : 500mV AC
AC Max. voltage (V) : 1000V AC
DC Max. voltage (V) : 1000V DC
Min. DC current : 400uA DC
Min. AC current : 500uA AC
Max. DC current : 10A DC
Max. AC current : 10A AC
additonal measurements : Resistance
Frequency
Continuity test
Min/Max
Bandwidth : 10 kHz
Autonomy : 300 hour
Safety Level : CAT I
CAT II
CAT III
CAT IV
Safety Overvoltage : CAT IV 600V / CAT III 1000V
Additional Characteristics : -
Package includes : 1 set of 2 test leads with touch points, 1 9V battery, 1 manual
Dimension (HxWxD) (mm) : 160x105x56 mm
Net Weight : 500 g
Standard Manufacturer Warranty : 3 YEARS
Top

C.A 5011

Genuinely efficient and economical

The TRMS C.A 5011 multimeter gives the true RMS value whether the signal is sinusoidal or distorted. It is suitable for all types of installations, even those with so-called non-linear loads.

  • Automatic AC/DC recognition
  • AC/DC voltage: 400mV to 1,000V (5 cal.)
  • Utilisation frequency: 20Hz to 10kHz
  • Typical accuracy: 0.5% - Impedance: 10MΩ
  • AC/DC intensity: 400µA to 10A (6 cal.)
  • Resistance: 400Ω to 40MΩ (6 cal.)
  • Continuity test: (R < 400Ω) et diode
  • Frequency: 4kHz to 400kHz (3 cal.)
  • Fuse indicator LED
  • "Voltest" LED if voltage present in Ωmeter utilisation and continuity
  • Max and Hold value functions
  • Can be used as a zero galvanometer
  • Backlit display
  • IEC 1010-1 1,000V Cat III
  • Dimensions: 160 x 105 x 56mm. Weight: 500g
  •  
    //-->