<< Volver
|
 |
Precio Testoon : 279 € Sin tasas
Cantidad :
Marca : Fluke Networks
Ref. fabricante : TS100
Presentación
Cable fault finder.
Fault locator, analog tone generator, cable & wire manager.
Finds open and shorts, measures distance to faults (On any 2 conductor cable pair from just one end up to 3000 feet (915m)), continuous measurement, measure cable on spools.
Changeagle cord.
Productos de la misma categoría
|
| |
|
| Características adicionales : | -
| | El paquete incluye : | 4 AA batteries, pouch with belt clip
| | Dimensionar (HxWxD) (milímetros) : | 188x38x70 mm
| | Peso neto (kilogramo) : | 453 g
| | Garantía estándar del fabricante (año) : | 1 año
| |
|
| |
|
Marca : Fluke Networks
Ref. fabricante : TS100
Ref. pedido : 26500000
TS®100 Cable Fault Finder |
| An easy-to-use fault locator, cable and wire manager and tone generator. |
|
|
- Works on any two or more conductor cable up to 3,000 feet (915 meters)
- Instantly measures distance to open or any fault from one end of any cable pair
- Patented SmartTone™ tone generator positively identifies pair
- Measures cable distance on spool
- Measures constantly while "On"
- Displays distance reading rather than waveform
- Large bright LED screen
- One button operation
- High voltage detection
- Moisture proof
- Additional line cord options available for coaxial cable (F-connectors) and other applications
This
easy-to-use, competitively priced tester is three tools in one -- a
fault locator, a cable & wire manager and a tone generator with
SmartTone™ technology. From just ONE END of any two or more conductor
cable you can measure up to 3,000 feet (915 meters). Easily find the
distance to opens or shorts on electrical wire, telephone wire,
security wire and coax. Results appear as a distance reading rather
than a waveform, so it's perfect for technicians unfamiliar with Time
Domain Reflectometery (TDR). Find and fix cable problems without
pulling new wire or blindly cutting into walls. Intermittent faults are
easier to find because the unit constantly measures while "On".
It's perfect for inventory management of cable stock in trucks and
warehouses and it can help you generate more accurate bids for jobs by
quickly assessing needs and managing the cable stock with greater
accuracy. Patented SmartTone technology gives you 5 distinct tones to
use for exact wire and pair identification, even in proximity to
current-bearing cable. When touching the wires together and momentarily
shorting the far end of a cable pair, the SmartTone technology will
change the cadence of the tone generated. This tone change you hear
through the probe positively verifies the correct wire pair. Voltage
detection in the unit will immediately sound an alarm if you
accidentally clip onto an energized pair, up to 250VAC.
| Specifications |
 |
|
Power |
4 AA alkaline batteries, provide 50 hours of operation. |
|
Reverse Battery Protection |
No damage to the tester will occur if the batteries are installed backwards. |
|
Input Protection |
250 V rms ac, continuous or intermittent |
|
Moisture |
If the tester is exposed to water, some may get inside, but it will
suffer NO DAMAGE. See the information on moisture under “Maintenance”. |
|
Impedance Range |
35 Ω to 330 Ω with auto-compensation within this range. Cables with
an impedance outside this range will not be properly tested and may
produce erratic or incorrect readings. |
|
Maximum Length |
2500 feet on certain cable types, 2000 feet on most cable types, and
500 feet on very lossy cables. The tester will display –Err if the
cable is too long to be correctly measured. |
|
Representative Maximum Cable Length |
2500 feet: CAT-5 Twisted Pair 2000 feet: 12/2 ac Wire 1000 feet: RG-6/U TV Coax 500 feet: RG-174/U Coax |
|
Minimum Length |
No minimum length Minimum non-zero reading is 2 feet |
|
Length Accuracy |
±2 feet for cables less than 10 feet ±5 feet for cables longer than
10 feet and shorter than 200 feet ±3 % and ±5 feet for cables longer
than 200 feet |
|
High Voltage Detection |
An ac voltage of more than 5 V rms will trigger the High Voltage Warning. |
|
Measurement Rate |
Maximum of 4 complete measurements per second, decreasing to 2 seconds per measurement based on cable size and uniformity. |
|
VOP |
Adjustable from -20- to -99-, retained during power off. Default to -66- when batteries are changed |
|
Measurement Technology |
Time Domain Reflectometry (TDR) with 50 Ω drive impedance, 6 V maximum pulse height |
|
Low Battery |
Indicator flashes when battery voltage falls below 4.1 V |
|
Tone Injection |
Approximately 1 kHz at an amplitude of 80 % of battery voltage.
Variable frequency and cadence. Tone characteristic is changed as cable
condition changes to “normal-open” from any other condition. |
|
Cable Type |
Virtually all two or more conductor cables |
|
Temperature Range |
|
Operating Storage |
32 °F to 131 °F (0 °C to 55 °C) -40 °F to 158 °F (-40 °C to 70°C) |
|
Humidity |
|
Operating |
0 % to 80 % |
|
Storage |
0 % to 100 % |
|
Weight |
1 lb |
|
Certifications and Compliance |
Conformité Européenne. Conforms to relevant European Union
directives. CAN/CSA-C22.2 No. 60950-1-03 CAN/CSA-C22.2 No. 1010.1-92
CSA-C22.2 No. 1010.1B-97, UL/ANSI 3111-1 |
|
|
French 
German 
| Mi cuenta
| Cesta (0 artículo)
Tips & Tricks to use Testoon
Disponibilitad
.jpg){kind=logo}
