i400 AC Current Clamp

High safety AC current clamp for DMM's Fluke Current clamps are the ideal tools to extend the functionality of Fluke tools. The i400 is a single range 400 A ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1. Companion to your DMM to measure up to 400 A AC 1mA/Amp output garantuees easy reading on you meter Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating Specially designed to offer maximum utility in a very compact shape Take accurate current readings without breaking the circuit Soft non-slippery overmold handle prevents form accidental touching live wiring Max. conductor Ø 32 mm Specifications Nominal current range 400A Continuous current range 1 A - 400 A Maximum Non-Destructive Current 1000 A Lowest measurable current 1 A Basic accuracy 2% + 0.06 A (45-400 Hz) (% reading + floorspec) Useable frequency 5 Hz - 20 kHz Output level(s) 1 mA/A Safety Specifications Safety CAT IV 600 V, CAT III, 1000 V Maximum voltage 1000 V AC rms from earth to ground, in compliance with EN61010 Mechanical & General Specifications Warranty 1 year Maximum conductor diameter 32 mm (1.25 inches) Maximum conductor size (busbar) 750 MCM Output cable length 1.5 m (59 inches) Shrouded banana plugs Yes