Presentation
Industrial multimeter.
True-rms ac voltage and current for measurements.
Voltage: 1000V AC/DC.
Current: 10A AC/DC.
Bandwidth: 15 Hz - 20 kHz.
Resistance, continuity and diode test, temperature, min-max peak.
Min/Max and average recording to capture variations automatically.
low pass filter.
The NEW Fluke 27 II and 28 II digital multimeters define a new standard
for operating in harsh conditions with the features and accuracy to
troubleshoot most electrical problems. Both meters have IP 67
(waterproof and dustproof) rating, MSHA approvals (pending), extended
operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C
for up to 20 minutes) and 95 % humidity, and have been designed and
tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series
Multimeters are built to work in the toughest environments.
Measure up to 1000 V ac and dc
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 200 kHz
Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Peak min-max (28 II)
Unique
function for accurate voltage and frequency measurements on adjustable
speed motor drives and other electrically noisy equipment (28 II)
Features:
New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
Designed to withstand 3 meter drop (with holster)
Hi resolution 20,000 count display mode (28 II)
True-rms ac voltage and current for accurate measurements on non linear signals (28 II)
Average responding voltage and current for measurements (27 II)
New – Backlit keypad buttons allow for easy visibility in lowlit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands
hazardous 8,000 volt spikes caused by load switching and faults on
industrial circuits and complies with second edition IEC and ANSI
electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
MSHA approval (pending)
Accuracy specifications
DC voltage
Range
0.1 mV to 1000 V
Accuracy
27-II:0.1 % +1 28-II:0.05 % + 1
AC voltage
Range
0.1 mV to 1000 V
Accuracy
27-II: 0.5 % +3 28-II: 0.7 % +4
DC current
Range
0.1 μA to 10 A
Accuracy
27-II: 0.2 % + 4 28-II: 0.2 % + 4
AC current
Range
0.1 μA to 10 A
Accuracy
27-II: 1.5 % + 2 28-II: 1.0 % + 2
Resistance
Range
0.1 Ω to 50 MΩ
Display counts
27-II
6000
28-II
6000/19,999
Capacitance
1 nF to 9999 μF
Frequency
0.5 Hz to 199.99 kHz
Temperature
27-II: N/A 28-II: -200 °C to +1090 °C
Low pass filter
(Measurement on VSD’s)
27-II: N/A 28-II: Yes
Compliance
CAT IV 600 V , CAT III 1000V
IP rating
27-II:
IP 67
28-II:
IP 67
Power
Three AA batteries
Battery life
800 hours
General specifications
Display
Bar graph/backlight
Yes/Yes
Data storage
Peak transient capture
250 μS (28 II)
Min/Max/Avg
Yes
Reading hold
Yes
Other features
Relative readings (zero)
Yes
Battery type
Three AA batteries
Warranty and protection
Safety rating
CAT IV 600 V/CAT III 1000 V
External protection
Rubber holster
Drop test
10 feet drop test
Dustproof/waterproof
Yes, IP 67 rated
Warranty
Limited lifetime
Size (HxWxL) with holster
6.35 cm x 10.0 cm x 19.81 cm
(2.5 in x 3.93 in x 7.8 in)
German 
Spanish 
| My Account
| Cart (0 Article)
Tips & Tricks to use Testoon
See it on TestoonTV
Check Availability
Download the user manual
.jpg){kind=logo}
