<< Return
|
 |
Testoon Price : 1 288 € Exc VAT
Quantity :
Brand : Fluke
Manufacturer Ref. : 345
Presentation
Single and balanced triple phase power.
W, VA, VAR, kWh.
TRMS.
AC/DC current: 1400 A AC rms, 2000 A DC.
AC/DC voltage: 825V AC rms et DC .
Data recording, harmonics, inrush currents, scope function, view graphs and generate reports.
<< Similar products
 Download the data sheet
|
| |
|
| Max effective power (W) : | 1200 kW AC, 1650 kW DC
| | Nature of the network : | Single-phase
Balanced three-phase
| | Power type (Type) : | Active power (W)
Reactive power (VAR)
VA
| | AC/DC Max voltage (V) : | 825V
| | AC/DC Max current (V) : | 2000A DC, 1400A AC
| | Wattmeters and testers frequency range (Hz) : | 15Hz - 1kHz
| | Measurement Powermeters functions (Type) : | Harmonics (THD)
Frequency
Voltage
Current
| | Autonomy (Hour) : | 12 hour
| | Safety Level : | CAT I
CAT II
CAT III
CAT IV
| | Safety Overvoltage : | CAT IV 600V
| | Additional Characteristics : | USB interface
| | Package includes : | Sacoche de transport, Logiciel Power Log, Cordons de mesure, Pinces crocodile, Sondes de test, Câble USB, Adaptateur secteur international / dispositif d'exclusion des piles, Manuel d'utilisateur en anglais imprimé, Manuels multilingues sur CD
| | Dimension (HxWxD) (mm) : | 300x98x52 mm
| | Net Weight (kg) : | 820 g
| | Standard Manufacturer Warranty (Year) : | 1 YEAR
| |
|
| |
|
Brand : Fluke
Manufacturer Ref. : 345
Order Ref. : FLUKE 345
Weight : 1.2 kg
Fluke 345
Power Quality Clamp Meter
|
This
clamp on meter is a combination power analyzer, power quality logger,
and clamp meter, and is ideal for monitoring electronic loads.
With the bright color power meter
display to analyze the harmonic spectrum, a low-pass filter to remove
high frequency noise, and a high EMC immunity design, the Fluke 345
power analyzer is ideal for troubleshooting power quality on switching
loads. Additionally, the Hall Effect clamp meter design makes
measurement of dc current possible without the need to break the
circuit with the power meter. The internal memory of the power analyzer
enables long-term power quality logging for analysis of trends or
intermittent problems.
Applications
- Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parameters
- Harmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipment
- Inrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
- Load studies - Verify electrical system capacity before adding loads
|
|
- AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
- Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance
- Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter
- Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics
- Verify batteries: Direct measurement of dc ripple (%) for battery and dc systems
- Troubleshoot harmonics: Analyze and log harmonics digitally or graphically
- Inrush current: Capture and analyze nuisance tripping, from 3 seconds to 300 seconds
- Easy to use: Easily confirm power meter setup with large backlit color display of waveforms and trends
- 3-Phase power: Built in capability for balanced loads
- View graphs and generate reports: Use power analyzer with included Power Log software
|
German 
Spanish 
| My Account
| Cart (0 Article)
Tips & Tricks to use Testoon
Check Availability
