Features:
- Full IEEE 802.3ab compliant Gigabit Ethernet testing
- BERT testing for VoIP, data, and video-over-IP applications
- Supports DHCP and IP Ping
- Comprehensive wire-mapping capabilities including TDR
- Customisable test reports
- Intuitive graphical user interface
- Expandable data storage
Kit contains a set of 2 mains power supplies
■ Gigabit Performance Qualification – Test to IEEE 802.3 standards
■ Selectable Performance Testing – qualify performance of Data, Voice over IP, and IP Video applications
■ Performs Gigabit Ethernet link establishment test in 10 seconds
■ Data Monitoring to detect intermittent network problems
■ Smart Autotest Function detects the presence of the SIGNALTEK remote, active network device or open ended cable and automatically runs the appropriate test suite
■ Intuitive Graphical User Interface for fast and easy operation
■ Internal and USB Data Storage – store 20,000 tests internally or unlimited on USB drive
■ Prints Easy-to-Read Pass/Fail Qualification Reports
■ Provides comprehensive cable testing for voice, data, and video applications
■ Performs complete wiremap and length tests of: 1, 3, and 4 pair UTP/STP, and series 6/59 coaxial cable to TIA-568 A/B and TIA-570 standards
■ Performs a full IEEE 802.3ab compliant Gigabit Ethernet packet test in about 35 seconds with 97% performance certainty
■ Includes a TDR (Time Domain Reflectometer) for accurate length measurements and to aide in locating cabling faults by providing distance to short/open information
■ Supplied alligator clips allow testing of speaker, alarm, thermostat, home automation devices, and nearly any other type of control wire
■ Offers service detection to verify true 10/100/1000 Mbps Ethernet operations
■ Provides Bit Error Rate test for VoIP, data, and videoover-IP applications
■ User-defined data logging and network monitoring to detect problems that may cause network outages
■ Selectable test modes to qualify cabling support of Data, Voice over IP, and IP Video transmissions
■ PING tests: IP adressing, DHCP, host, router, mask, internet
Specifications
Cable Types
■ Voice/phone cable – USOC/RJ11/RJ12 interface
■ Data cable – (STP/UTP) RJ45 for CAT 3/5e/6/6a/7 cabling
■ Coax cable – via RJ45-to-F patchcord, series 58, 59, 6 cabling (75 ohm)
Cable Length Measurement
■ Exceeds IEEE 802.3 specifications
Battery Life: Standard AA Alkaline Batteries
■ Standby – 90 days
■ Cable testing – 30 hours
■ Network monitoring – 4 hours
Ports/Connections
■ RJ45 test interface port
■ Mini-USB “A” device port
■ Standard USB “B” host port
■ DC power input for longterm network monitoring
Physical Dimensions
■ Display Handset:
7.9L × 3.6W × 1.5D (201mm × 91mm × 38mm)
■ Remote Handset:
6.8L × 3.5W × 1.5D (173mm × 89mm × 38mm)
■ Near-end Weight:
12.5 oz. (354g) Weight without batteries
■ Remote-end Weight:
9 oz. (255g) Weight without batteries
|