Excellent meters for most jobs that require flexibility, accuracy and speed. Value packed features make these meters a must in every "Tool Kit®".

2,000 counts

0.5% DCV accuracy

DC voltage to 1000V

AC voltage to 750V

DC current to 10A

AC current to 2A

Resistance to 20M ohm

Capacitance to 20uF

Frequency counter

Transistor test

Temperature

Continuity

Diode test

Protective rubber boot included

 

Specifications	model 2706A
DC Volts
Ranges	200mV, 2V, 20V, 200V, 1000V
Resolution	100uV, 1mV, 10mV, 100mV, 1V
Accuracy	+-(0.5% + 1 Digit)
Overload Protection	200 mV Range 500V DC + AC Peak, 350V RMS Sine: All Other Ranges: 1200V DC + AC Peak, 800V RMS, Sine
Input Impedance	10 M
AC Volts
Ranges	200 mV, 2V, 20V, 200V, 750V
Resolution	100 uV, 1 mV, 10 mV, 100 mV, 1V
Basic Accuracy	+-(1.5% + 4 Digits)
Frequency Response	50 to 500 Hz
Overload Protection	200 mV Range: 500 VDC + AC Peak, 350V RMS, Sine: All Other Ranges: 1200 V DC + AC Peak, 800V RMS, Sine:
Input Impedance	10 M
DC Current
Ranges	200uA, 2mA, 20mA, 200mA, 2A, 10A, (2a: 2706A only)
Resolution	0.1uA, 1uA, 10 uA, 100 uA, 1 mA, 10 mA (1 mA: 2706A only)
Accuracy	+-(1% + 1 Digit): 10A Range: +-(2% + 3 Digits)
Burden Voltage	10A and 200mA range: 750mV max.; All Other Ranges: 325mV max.
Overload Protection	10A Range: Unfused: All Other Ranges: 250V Fuse
AC Current
Ranges	200uA, 2mA, 20mA, 200mA, 2A, 10A (2A: 2706A only)
Resolution	0.1uA, 1uA, 10uA, 100uA, 1mA, 10mA, (1 mA: 2706A only)
Accuracy	+-(1.2% + 4 digits): 10A Range: +-(2% + 4 Digits)
Frequency Response	50 to 500 Hz
Burden Voltage	10A and 200mA Range: 750mV max.: All Other Ranges: 325mV max.
Overload Protection	10A Range: Unfused; All Other Ranges: 250V Fuse
Resistance
Ranges	200, 2kOhm, 20kOhm, 200kOhm, 2MOhm, 20MOhm, 200MOhm (200MOhm: 2707A only)
Resolution	0.1, 1Ohm, 10Ohm, 100Ohm, 1 kOhm, 10 kOhm, 100 kOhm (100kOhm: 2707A only)
Basic Accuracy	200 MRange (2707A only): +-(5% + 10 Dgt.); +-(0.8% + 1 Digit)
	20 MRange: +-(3% + 1 Digit)
Overload Protection	500 VDC + AC Peak
Diode Test	Tested at 1.6mA and 3.2V Max.
Transistor Test (hFE)	Base Current: 10 uA Vce; 2.8V; Gain Indication: 0 to 1,000
Capacitance
Ranges	2,000 pF, 20 nF, 200 nF, 2 uF, 20 uF
Resolution	1 pF, 10 pF, 100 pF, 1 nF, 10 nF
Accuracy	+-(3% + 10 Digits)
Test Frequency, Voltage	400 Hz, 50 mV
Frequency
Ranges	2 kHz, 20 kHz, 200 kHz, 2 MHz, 15 MHz
Resolution	1 Hz, 10 Hz, 100 Hz, 1kHz, 10kHz
Accuracy	+-(0.1% + 2 Digit)
Sensitivity	1Vrms
Overload Protection	500V DC + AC Peak
Logic Probe (TTL)
Logic Threshold	Does not apply
Minimum Pulse Width
Input Impedance
Overload Protection
Temperature
Range	-4 0 to 14000F (-20 0 to + 7500 C)
Accuracy
-4 0 to + 9000F (-20 0 to 5000 C)	+-(2% + 4 0 F) +-(2% + 2 0 C)
900 0 to + 14000F  (500 0 to + 7500C)	+-(3% + 4 0 F) +-(3% + 2 0 C)
Continuity Tone	Tone Sounds within 100 mS for Resistance Under 100V
General
Display	3 1/2 digit, high-contrast 0.7'' LCD, 1999 counts
Sampling	3 times/sec. (nominal)
Operating Temp:	32 0to 104 0 F (0 0 to + 400 C), 0 to 70% RH
Storage Temp	-4 0to 140 0 F (-20 0 to 600 C), 0 to 80% RH
Power Requirements	9V NEDA 1604.
Battery Life	200 hours (alkaline) nominal 275 hours (alkaline) Nominal (2703B only)
Dimensions (HxWxD)	5.9x3.1x1.3'' (150x79x33 mm)
One Year Warranty
Accessories
SUPPLIED: Battery, Test Leads, Instruction Manual, Thermocouple Probe (2706A only) OPTIONAL: TL-2A Deluxe Test Leads, TL-3 Accessory Tip Kit (for TL-2A), PR-28A High Voltage DMM Probe (40kVDC), TL-130A General Purpose DMM Kit Carrying Case (not included): LC-29B