FREQUENCY MEASUREMENT

Frequency Span

Frequency Range: 150kHz to 1300 MHz
Setting Modes: Centre frequency plus Span, or Start plus Stop frequencies
Maximum Span: 1299.85 MHz
Minimum Span: 320 kHz, or Zero Span with demodulation
Setting Resolution: 1 kHz at any frequency
Setting Accuracy: Reference Frequency Accuracy for Start, Stop & Centre (Zero-Span) frequencies

Reference Frequency Accuracy

Initial Accuracy: Better than ± 10 ppm at 20 oC
Stability: Better than ± 10 ppm over 10 oC to 30 oC
Ageing: Better than ± 3 ppm per year

Phase Noise

Phase Noise: Typically -100dBc/Hz at 100kHz offset at 500MHz

Resolution Bandwidth

RBW: Selectable 280 kHz or 15 kHz
Video Filtering: Selectable independently of RBW setting

Markers

No. of Markers: One, Two (or None)
Marker Resolution: 0.1 kHz at all frequencies
Marker Accuracy: 1/320th of Span ± 0.1kHz plus reference frequency accuracy.
Readout: The frequencies at the marker points and the frequency difference are displayed

AMPLITUDE MEASUREMENT

Amplitude Range

Display Range: 80 dB
Reference Level: Selectable as -20 dBm or 0dBm
Vertical Expansion: 40 dB window pan-able over 80 dB range

Amplitude Accuracy

Ref. Level Accuracy: Better than ± 1 dB at 50MHz (20oC ± 5oC)
Flatness: Better than ± 1.5 dB over 0.5MHz to 1300MHz
Linearity: Better than ± 1 dB over 50dB from reference level
Noise Floor: Better than -90 dBm average displayed noise floor (reference level = -20 dBm, RBW = 15 kHz)

Distortion and Spurii

3rd Order Intermod.: < –60dBc for two signals at 10dB below reference level (500MHz and 501MHz)
Harmonic: < –60dBc at 10dB below reference level (100MHz)
1st & 2nd Image: <– 55dBc, typically <– 60dBc
Residual Spurii: Below noise floor

Markers

No. of Markers: One, Two (or None)
Resolution: 0.1 dB
Readout: The level at the marker points and difference are displayed.

SWEEP

Sweep Method: Peak detection for 320 points per sweep. The amplitude and frequency of the peak level found within each sub-span is stored (sub-span = span/320).
Sweep Time: Set automatically by Span, RBW and Video Filter.
Sweep Modes: Normal (continuous), Single, Peak Hold, Average (2 to 256).
Sweep Control: Run and Stop buttons. Peak-hold and Average are reset whenever Run is pressed.

DEMODULATION (Zero Span mode)

Demod. Modes: AM or FM
Display: Carrier amplitude only (horizontal line).
Audio Out: 30 mW into 32 Ohm mono or stereo headphones, adjustable volume, 3.5mm jack socket

SIGNAL INPUT

SUPPLIED ITEMS

DISPLAY

Display Type: 3.7 inch (9.4 cm) backlit TFT LCD,

480 x 320 pixels total, 16 bit colour, touch screen.
Trace Area: 300 x 320 pixels (high resolution mode).
Graticule: 8 x 10 divisions, light grey graticule

with annotation (graticule selectable on or off).
Displayed Points: 320 points per sweep

(peak detected).
Live Trace: Dot-joined trace from current

or held sweep using . Selectable on or off.
Reference Trace: Stored trace either recalled

from memory or copied directly from live trace.

Selectable on or off.
Resolution Modes: Selectable as High Resolution

or Low Resolution.
(In low resolution mode the trace area becomes

150 x 160 points where each point is a block

of 4 pixels. Only 160 sweep points are displayed.

This mode is useful in situations where the display

could otherwise be difficult to see - e.g. when

the instrument can not be viewed at an optimum

distance.)

MEMORY STORAGE

Memory Type: Non volatile Flash memory,

using removable SD or MMC cards

(one card supplied).
Store Trace: Any number of traces can be

stored under either default file names or user

entered file names. Traces are stored as tables

of amplitude versus frequency and can be

imported into other programs, as well as

being recalled to the screen.
Recall Trace: Recalls any stored trace

to the reference trace of the display.
Store Set-up: Any number of instrument set-ups

can be stored under either default file names

or user entered file names. All settings

of the instrument are saved.
Recall Set-up: Recalls any stored set-up,

overwriting the existing settings of the instrument.
Copy Screen:  This function copies the whole

screen area to memory as a bit-map.

Any number of screens can be stored under

either default file names or user entered

file names.

Screen bit-maps can be viewed using

the handheld picture viewing function,

or transferred to a PC for printing.

CONNECTORS

RF Input: Standard SMA connector.
DC Power: 1.3 mm power socket for

5.2V/1A external power source.
USB: Mini USB connector which provides

direct access to the USB port of the handheld.
Audio Out: 3.5 mm jack socket for demodulated

audio out (accepts mono or stereo plugs).

POWER SOURCES

Battery Operation
The spectrum analyzer and the handheld contain

their own rechargeable battery packs.

The spectrum analyzer is controlled from

the handheld and is turned off whenever

the spectrum analyzer program is exited,

or the handheld is turned off.

Spectrum analyzer
Battery Type: Ni-Mh 3.6V 700mA-hr (3 x AAA)
Battery Life: > 5 hours continuous operation
Recharge Time: < 4 hours from fully discharged

Handheld Computer (Palm T|X)
Battery Type: Li-ion 3V 1050mA-hr
Battery Life: Typically 4 hours continuous
Recharge Time: < 4 hours from fully discharged
Auto Sleep Mode: To conserve battery life,

the system can be set to automatically switch

into sleep mode after a defined time from

the last key press. This can be set

between 5 mins and 60 mins (or never).
Battery Status: Indicators for both batteries.

AC Line Operation/Charging
The PSA1301T can be operated

from mains power using the AC line adaptor provided. This powers and recharges both the spectrum analyzer and the handheld computer simultaneously.
Voltage Range: 100V to 240V nominal

50Hz/60Hz

MECHANICAL

Size: 170mm high x 97mm wide x 47mm deep
Weight: 495 grms total inc. Palm T|X.
Tilt Stand: Built-in tilt stand for bench

use which angles the unit at approx.

25 degrees to the horizontal.
Stylus: Casing incorporates standard

Palm stylus.

ENVIRONMENTAL AND SAFETY

Operating Range: +5oC to + 40oC,

20% to 80% RH.
Storage Range: -10oC to +50oC
Environmental: Indoor or outdoor use

at altitudes to 2000m, Pollution Degree 2.
Electrical Safety: Complies with EN61010-1.
EMC: Complies with EN61326.