Economical and “ ALL IN ONE ”

Designed for setting up digital educational labs and for developements without using power supplies, generators, logic analyser, oscilloscopes and breadboards.

Very effi cient, it replaces all the instruments normally used, thus reducing dramatically the cost of the lab and eliminating the risk of bad contacts, damages, hazardous wiring, while reducing expenses and inventory.

ALFA edu is driven by the PC. It provides a fabulous programming environment with 4 levels of sophistication in order to adjust to the student level and to the task. Its software environment allows : Waveform edition, manipulation and stimulus generation with step by step or on the fl y events capture, and more...

Hardware presentation.  - 11 cm x 18 cm x 4 cm box size.  - DUT interface : 40 pins ZIF connector.  - 2 programmable LEDs, GND and USB plugs, an  external power supply input port is provided in  case more than 250 mA are necessary.  - Channels:40 each, including 38 I/Os.  - Logic Functions:    Generation: Force 0 / 1 / Inhibit,    Comparison: Compare 0 / 1 / Mask,    Loads: Pull-up / Pull-down / Hi Z.  - Sequencing:Up to 3 000 vectors / Sec  - Test memory depth:    Either 512 vectors at full “real-time” speed, or    unlimited (PC disk drive) when under 300 vectors    per seconde.  - Logic Levels :    Force and compare : 3,30 Volts   -User  power supplies:    * 5,0 V, 250 mA max internally.    * 5 volts DC external input, in case more power    is necessary for the Lab or the prototype.  - PC interface: USB.  - Working conditions.  Temperature: 15°C to 30°C,  Humidity: 20% to 80%,  Supply: Standard thru USB

Real Time” 24 bits Processor .  - The locally emulated sequencer off ers:  - 4 general purpose registers (Rn)  - 4 sub-programs levels.  - 8 memory words  - “Real-Time” processing  This means : No delay, pipelines or dead  cycles allowing to work despite unpredictable  behavior of the prototype.  A branch computed at cycle “n”  is applied at cycle “n+1”